Removing Boot/Trunk Inner Trim

B-Class Electric Drive Forum

Help Support B-Class Electric Drive Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

07harley

New member
Joined
Oct 26, 2024
Messages
2
Location
Greensboro
Hi,
I'm gearing up to install a reverse camera on my ride, and I need to tap into the reverse light wiring. Anyone tackled pulling off the boot/trunk inner trim before? Got any tips for getting it done safely and smoothly?

Tnx. Harley
 
Hey Harley! I haven’t done it myself, but I’ve heard starting from the edges and working your way in usually helps. Just be careful with any clips or fasteners, and use a trim tool if you have one. Cheers
 
Appreciate the tip! I was actually planning to start with the edges anyway. I don’t have a trim tool yet, but I’ll definitely grab one before I get into it. Hoping I don’t run into too many clips that are a pain to get to! Thanks, man!
 
Hi,
I'm gearing up to install a reverse camera on my ride, and I need to tap into the reverse light wiring. Anyone tackled pulling off the boot/trunk inner trim before? Got any tips for getting it done safely and smoothly?

Tnx. Harley
I've removed mine atm. Used a plastic trim ply tool. It popped off easily.
 
Back
Top